EN

RU
  • Palm oil extraction production line

Palm oil extraction production line

Features:
Palm oil extraction production line: 1. Introduction of process advantages of palm oil extraction production line The palm oil extraction production line uses a squeezing process to extract palm oil. This process has the advantages of mature and perfect design and reasonable design. The palm palm oil extraction production line adopts a self-sufficient production mode, which not only saves the cost of production, but also reduces the pollution to the environment, which is conducive to the recycli

We're here to help:Easy ways to get the answers you need.

products list

Oil making machine

Oil Refinery

Chemical machine

Oil Extraction machine

Palm oil extraction production line:
Palm oil extraction production line:
1. Introduction of process advantages of palm oil extraction production line
The palm oil extraction production line uses a squeezing process to extract palm oil. This process has the advantages of mature and perfect design and reasonable design. The palm palm oil extraction production line adopts a self-sufficient production mode, which not only saves the cost of production, but also reduces the pollution to the environment, which is conducive to the recycling of resources; combined with the actual situation of the raw material country, the project usually includes the oil extraction part and the water treatment part , Refining and fractionating of crude palm oil, power supply, etc.
Second, palm oil extraction production line process application scope
Palm trees are perennial oil crops that grow in tropical regions, and have the advantages of large yield and low cost. Palm oil extraction production line is widely used in palm fruit edible oil processing. Palm oil is already one of the largest edible oils in the world and is widely used in bulk food processing, edible cooking and biodiesel production.
3. Introduction of crude oil production process of palm oil extraction production line:
The following will introduce the production process of palm crude oil:
Palm fresh fruit (FFB) enters the fruit-producing period after growing for about 3 years. After being picked by the fruit farmers, it is transported to the palm crude oil production workshop, and then enters the following steps for processing:
1 weighing
  The fruits transported into the factory are weighed by truck scale first, which is convenient for settlement and subsequent production cost accounting.
2 unloading fruit
After passing through the ramp, the FFB is screened to remove impurities and then enter the conveying machinery to be transported to the fermenting tank. The time from picking to fermenting should not be too long in the middle. Its free fatty acid (FFA) will increase after 24 hours, which is not conducive to the future Production and processing.
3. Fermentation
After entering the fermenting tank, FFB performs high-pressure high-temperature cooking, and this stage prepares for various subsequent processes.
4. Fruit removal
FFB is softened during the fermentation process, and the palm fruit is separated from the empty fruit bunch (EFB) after being beaten and sieved by the defruiting machine.
The empty fruit bunch (EFB) is transported and hoarded to the orchard for fertilizer or fuel to generate electricity, which can also be used for other purposes.
5. Mash up
After threshing, the fruit is crushed by the mixing and squeezing of the masher.
6. Press
The crushed fruit is extracted by spiral extrusion in a press.
7. Fiber separation
After being crushed, the cake-shaped fibers are crushed into the air separation system to separate the fibers from the core, and the fibers can be used for power generation by drying the fibers.
8. Separation of nucleoli
After the core is separated from the fiber, the core is divided into kernels and shells by a nuclear crusher, and then the kernels and shells are separated by an air separation and water washing system. The shells are stored as fuel and enter the boiler fuel system. Kernels are stored after drying.
9. Crude palm oil clarification
The crude oil (CPO) contains certain moisture and impurities after being squeezed out. After preliminary cleaning by the grit tank and vibrating screen, it enters the vertical clear oil tank and is heated and stirred to separate into dirty oil and clean oil. The clean oil is dried and transported to wool Oil storage tank. Dirty oil is processed and recovered after sand removal system and centrifugal separation.
10. Transportation of oil
According to the actual situation, make oil pipeline delivery.
11. Water treatment
The source water is generally introduced into the factory from nearby rivers, and after preliminary clarification and filtration, it is subjected to osmosis and reverse osmosis treatment to reach the boiler feed water standard.
12. Power system
The main power is to use palm fruit residue combustion boiler to drive steam turbine generator set to generate electricity, or palm fruit residue gasification power generation. Diesel generator sets are also available.
4. Process flow chart of palm oil extraction production line
The wet fiber cake contains wet fiber and wet palm core, and the wet fiber also contains 6-7% of oil and fat and some water. Before processing palm kernels, the kernels and fibers should be separated. First, the wet fiber and the wet palm core are broken up. Most of the fiber is separated by the pneumatic fiber separation system. The kernel and a small part of the fiber and large impurities are further separated by the polishing drum. The separated palm core is sent by the pneumatic conveyor system After entering the core silo, the core is crushed by the shelling machine. After the crushing mixture separation system, most of the shell and kernel are separated, and the remaining shell and kernel mixture is separated into a special mud bath separation system for separation. After the above process, pure palm kernels can be obtained (shell content in kernels <6%), and then sent to kernel drying bin for drying. When the moisture in the kernel is 7%, it is sent to the kernel storage bin for storage. Usually the total kernel amount after drying is 4%, so the palm kernel will not be pressed until a certain amount is collected. The separated palm nut shells are sent to the shell silo as backup fuel for the boiler.
After passing through the vibrating screen and sand settling tank, the palm crude oil is sent to the crude oil tank for heating, and then pumped into the continuous clarified oil tank for separation. The clean oil enters the clean oil tank and the dirty oil enters the dirty oil tank. After that, the dirty oil is pumped into the dirty oil centrifuge for separation, and the separated oil is sent to the continuous oil tank again; the clear oil is sent to the clear oil centrifuge for dehydration, and then enters the vacuum dryer, and finally the dried oil is pumped into the collection tank.
parameter
Output 10-3000 tons/day
Adaptation voltage 220--440V
Adapted frequency 50-60 Hz
https://www.huawei-mart.com/products/oil-machine/oil-extraction-machine/118.html





 
 

Inquiry:

Your name:
Your tel:
*Your email:
*Your inquiry: